Sort by
1-25 of 51 Products & Services
The SaturnA Sensor is found in the STA 6000 furnace. This sensor is available for order as a replacement or spare. Qty. 1
The CHN Prepacked Oxidation Pyrolysis Tube is found in the Oxidation Analysis Kit. These tubes have an estimated life of 1000 runs. These tubes are packed with Platinized Carbon and Cuprin. With this part number, you can replenish your supply. Qty. 1
The CHNS Prepacked Silica Reduction Tube is found in the CHN Analysis kit. These tubes have an estimated life of 2000 runs. These tubes are packed with the reagents Copper + and Cuprox. With this part number, you can replenish your supply. Qty. 1
The CHNS Prepacked Oxidation/Reduction Tube is found in the CHNS Analysis Kit. These tubes contain the reagents EA 6000 and Cuprin. They have an estimated life of 70 runs. With this part number, you can replenish your supply. Qty. 1
EA-1000 Reagent Kit comes standard in the 2400 Chemical Supplies Kit and various other EA kits and tubes. With this part number, you can replenish your supply of the reagent EA-1000. 70g/pkg. Qty. 3 pkgs.
The Volatile Sample Capsule Cover is made of stainless steel. It has an operating range of -40 to 300°C and a maximum pressure threshold of 24 bar. Qty. 1000
The Quartz Hangdown Wire kit comes standard in the TGA 8000 Spares Kit, but with this part number, it can be ordered separately as a spare or replacement kit. Qty. 5 wires
The nichrome Hangdown Wire is a nickel-chromium wire, 121 mm long and 0.24 mm in diameter. It is a straight wire, with a preformed hook at either end; one at a 30° angle, the other at a 65° angle. This kit contains 5 wires.
The Perkalloy Calibration Material is a 2 in long wire, approximately 300 mg, with a transition point of 596°C. It comes standard in the TGA 8000 Calibration Standards Kit, but with this part number, can be ordered separately to replenish your supply. Qty. 1
The Nickel Calibration Standard is a 2 in long wire, approximately 300 mg, with a transition point of 355.3°C. It comes standard in the TGA 8000 Calibration Standards Kit, but with this part number, can be ordered separately to replenish your supply. Qty. 1
The Iron Calibration Material is a 2 in long wire, approximately 300 mg, with a transition point of 780°C. It comes standard in the TGA 8000 Calibration Standards Kit, but with this part number, can be ordered separately to replenish your supply. Qty. 1
The Alumel Calibration Material is a 2 in long wire, approximately 300 mg, with a transition point of 154.2°C. It comes standard in the TGA 8000 Calibration Standards Kit, but with this part number, can be ordered separately to replenish your supply. Qty. 1
The Mounted Furnace Assembly is a replacement part for the PYRIS TGA analyzer. It has a temperature range of -29 to 1200°C, and a heating rate of 0.1 to 500°C/minute.
The Advanced Analysis Kit contains a synthetic sapphire standard disk, the Quartz TMS Dilameter Kit, the TMA Analysis Kit, the Extension Kit, Aluminum Oxide Powder, and a selection of probes and tubes for use with the TMA 4000.
The Thermocouple Assembly is the sample thermocouple in the PYRIS 1 TGA, and is available as a replacement or spare part.
The Zinc Reference Standard is used to calibrate all DSC instruments. It is pre-crimped, weighted, and has a transition point of 419.47°C.
The Tin Calibration Standard is used to calibrate all DSC instruments. It has a transition point of 156.60 °C.
Sort by
1-2 of 2 Resource Library